Starter Kit Autoflowering

Please follow the instruction below to add the batteries to the new propagator: 1. The batteries are housed inside the black cover, under the LED lights. Detach the lid of the battery compartment by applying pressure to one side of the lid. 2. Take the batteries out of the plastic wrapper. Position them as indicated by the + and - signs inside the battery compartment. 3. Touch the tactile pad to check that the batteries have been inserted correctly. The LED lights should light up. Replace the lid to its original position—a “popping” sound will indicate that it’s secure.

Thanks for your message. Please follow the instruction below to add the batteries to the new propagator: 1. The batteries are housed inside the black cover, under the LED lights. Detach the lid of the battery compartment by applying pressure to one side of the lid. 2. Take the batteries out of the plastic wrapper. Position them as indicated by the + and - signs inside the battery compartment. 3. Touch the tactile pad to check that the batteries have been inserted correctly. The LED lights should light up. Replace the lid to its original position—a “popping” sound will indicate that it’s secure. Please let us know if you need further assistance.

Please note that it should be used only once.

The only difference is that the Autoflowering comes with Autoflowering Seeds while the Feminized comes with Feminized seeds.

You can get a starter kit and then get a new Easy Start for the new harvest. You can check it out in this link: https://www.royalqueenseeds.com/growing/162-easy-start.html

No, we add a three seeds pack of White Widow on the Starters Kit Autoflowering.

No, you need to take out or the plastic will limit the growth of the root and it could end up killing it.

That would be enough to transplant it.

You can keep the lights on until the seedling comes out of the soil 2 or 3 cms.

The light should be on all the time, since the seeds are put in the soil.

Please refer to the following article for more information: https://www.royalqueenseeds.com/blog-how-and-when-to-transplant-your-weed-n350

No need to remove the soil stocked around the young plants, in fact, avoid doing so as this risks damaging the delicate roots. Just pop the whole thing into whatever grow medium you’re using soil, hydro or clay pebbles. Please refer to the following article about pot size: https://www.royalqueenseeds.com/blog-types-of-containers-for-growing-weed-n445

This holes should be closed during the germination, and open them once the plant starts to come out. Once they have grown two or three cms out of the ground it is time to transplant they all should be out after 72 hours so it is not necessary to take them out separately.

Please note that with this product you do not need to keep a specific temperature, just make sure you keep it in a dark and fresh place. The starter kit keeps the humidity necessary for the germination process.

Please note that the purpose of this kit is germination only. Once they have grown two or three cms out of the ground it is time to transplant them.

The kit can be use with all the seeds.

Once it is set up, the starter kit measures are 12 x 10 x 13 cm

Please note that this holes should be closed during the germination, and open them once the plant starts to come out.

Absolutely, also bear in mind that we sell the Easy Start separately so there is no need to buy the whole kit every time.

There is a tutorial video in the product page with very detailed instructions on how to use the Kit.

Yes, you can leave the light on during germination. It would lead the seedling to come out. Once they have grown two or three cms out of the ground it is time to transplant them.

All the packs come already made it is not possible to change them.

You do not need to add the rockwool, the Starter Kit components are enough to germinate.

There should be no problem, make sure you store it in a dry and cold place.

Please note that this holes should be closed during the germination, and open them once the plant starts to come out.

There are three seeds of White Widow Automatic included in the pack.

The light should be on all the time, since the seeds are put in the soil. Once you see the first leaves come out of the pot you should place the seeds in a bigger pot.

All the seeds come already made it is not possible to modify them.

We only work with feminized seeds.

Please check out the below link to for a more accurate information regarding this matter. https://www.royalqueenseeds.com/blog-best-lighting-for-growing-cannabis-n103

You need to keep the Seed inside of the pots until it germinates. If you are not going to use the seeds after receiving them, please take a look at the below link from our blog for seeds storage information: https://www.royalqueenseeds.com/content/36-how-to-preserve-seeds

Please use the pots only to germinate the Seeds, once they have sprouted it is essential that you move them to a bigger pot. If you are not feeding the plant and giving the right light it could happen that the plant does not deliver good results.

Both Starter kit contain three Seeds.

The Kit would work with all the Seeds.

Oui, c'est en fait ce que nous recommandons.

You should use one bacto bag each time, we only sell the backto in the kit.

The Starter kit is to be used for the germination only, once the plants start to grow you should move them to a bigger pot.

You can keep the lights on during the germination. It will help the plant to find the way out :)